Would You Like a Free Expert Consultation?

Las Vegas Handyman 

Not every project goes as well as planned. We would be happy to spend a few minutes answering your questions.

Subscribe by Email

Your email:

Browse by Tag

Pro Handyman Blog

Current Articles | RSS Feed RSS Feed

Handyman:Two Solid Methods To Hold A Sink In Place

  
  
  

Self-rimming or drop-in sinks are not difficult to install for anbath sink experienced handyman or homeowner. As their name implies, the sink bowl drops into a hole in the countertop and the rim of the sink rests along the perimeter of the bowl. So for the most part, they are not likely to move much unless impacted.

The only thing you need to do is to secure the perimeter of the sink in place. There are a couple of methods here that are both straightforward.

Most drop-in sinks will come with clips that screw into the rim of the sink from underneath the counter. These clips act like a clamp and the more you screw the clip in, the more pressure is exerted on the underside of the countertop. These work very well, unless the countertop is very thick. If you are installing the sink on top of a ceramic tile countertop, it may be too thick to use the mounting clips. This is because you have a wood substrate, followed by cement board, mortar, tile, etc. This counter may be so thick as to prohibit you from using the clips. In that event, you can use adhesive caulking.

Adhesive caulking is applied around the perimeter of the opening so that when you set the sink into the hole, the rim comes to rest in the adhesive caulking. When you set the sink, run a wet finger around the perimeter of the sink for a smooth finish, and then let everything dry.

Comments

Currently, there are no comments. Be the first to post one!
Post Comment
Name
 *
Email
 *
Website (optional)
Comment
 *

Allowed tags: <a> link, <b> bold, <i> italics