Not every project goes as well as planned. We would be happy to spend a few minutes answering your questions.
Current Articles | RSS Feed
If you have experienced a slow shower drain, you know it can be frustrating. The good news is that in many cases, the cause of the blockage is located just below the drain around the trap. You usually don’t need a snake to reach the blockage if it is in this location.
You will need to remove the drain cover from the shower drain. If you have a plastic cover, the strainer should just pop off. If you have a metal cover, it usually is held in place with two screws. The clog will be a mass of hair mixed with soap. Over time you will notice a foul smell as the hair degrades.
You can buy a “zip-it” tool to reach this area. This is nothing more than a long, thin piece of plastic with barbs on it. You stick the tool down the drain. On its way down, it pushes past the hair ball. It’s when you pull it out that the magic happens. The plastic barbs grab the hair ball and pull it out. It is easy but can be messy if you pull it out too fast. In a pinch, I suppose you could bend a metal coat hanger and put a little hook on the end of it to fish out the clump. I wouldn’t stick it past the trap though as you might not be able to get it out.
Allowed tags: <a> link, <b> bold, <i> italics