Not every project goes as well as planned. We would be happy to spend a few minutes answering your questions.
Current Articles | RSS Feed
Have you ever gone to open your dishwasher and the whole thing about pulls out of the counter? Well if so, you're not alone. Maybe it was the result of a poor dishwasher installation. It is a pretty simple fix that you and your trusty screwdriver can remedy.
Your dishwasher is secured to the underside of the counter by two screws. If you carefully open the door (so that the entire dishwasher doesn't tip out of the opening) you will see 2 brackets jutting out of the top of the unit. These brackets have holes in them for screws.
Once you place the dishwasher in position, simply secure it to the underside of the counter with screws. One caveat here: don't attempt to screw directly into the countertop material. You should be screwing into the sub-top which is typically made of particle board, plywood, or even cement board. If you try to screw directly into the countertop material, you risk damaging it by drilling right through the top, or even cracking some surfaces like granite.
It's probably a good time to adjust the height of your dishwasher too. The feet at the bottom turn to raise and lower the height of the unit. You can play with them for a level fit that is equidistant from all edges.
